In-Lab & OnsiteCalibration Services in Wichita Falls, TX
For more than 35 years, our metrologists have delivered precise calibration, instrument repair, and asset-database management to a wide range of industries across the Wichita Falls and North Texas area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Wichita Falls, TX
Wichita Falls sits on the Wichita River in Wichita County, about 15 miles south of the Oklahoma line and 115 miles northwest of Fort Worth, at the western terminus of Interstate 44 where US 287, US 277, US 281 and US 82 converge. The city anchors a three-county metro that also takes in Archer and Clay Counties. Its defining employer is Sheppard Air Force Base, five miles north of downtown at the end of Spur 325 — the largest and most diversified training installation in Air Education and Training Command, with roughly 7,222 people on its rolls. The host 82nd Training Wing runs technical training in aircraft maintenance, civil engineering, communications and power production, and its 982nd Training Group instructs at more than 60 Air Force installations worldwide. Alongside it the 80th Flying Training Wing operates the Euro-NATO Joint Jet Pilot Training program on T-6A Texan II and T-38C Talon aircraft, the only multinationally staffed and managed pilot training program of its kind. Off base the industrial employer base includes Arconic, the lightweight-metals manufacturer, and glass producer Vitro, together accounting for roughly 2,000 jobs, alongside United Regional Health Care System and the science and engineering programs at Midwestern State University in the Texas Tech University System. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Wichita Falls is roughly 1,400 miles from our Gaithersburg laboratory and well outside our Mid-Atlantic pickup-and-delivery radius, we serve Wichita, Archer and Clay Counties through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround in the lab, and scheduled onsite calibration appointments at your facility, planned as multi-day mobile-lab deployments rather than same-day service calls. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams Around Sheppard AFB and Wichita Falls Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Wichita Falls, TX Operations
Additional Calibration Options
How Tra-Cal Serves Wichita Falls, TX
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and ground transit between Wichita Falls and Maryland typically adds two to three days each way. Asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Wichita Falls-area facilities for fixed assets, large instrument inventories, and equipment that should not be moved. Because the trip from Gaithersburg is a long one, North Texas visits are scheduled as multi-day mobile-lab deployments, with each van carrying more than 100 instrument standards. Work is performed in a controlled environment at your site by appointment, with the same accreditation, NIST traceability, and documentation as in-lab service. Installation access at Sheppard Air Force Base remains the sponsoring organization’s responsibility.
Frequently Asked Questions
-
No. Our ISO/IEC 17025:2017 accredited laboratory is located at 8577 Atlas Drive, Gaithersburg, MD 20877. We are not a walk-in counter in Wichita Falls and we do not keep a local office there. We serve Wichita Falls and the surrounding Wichita, Archer and Clay County area through prepaid ship-in calibration with roughly a five-business-day turnaround in the lab, and through scheduled onsite mobile-lab visits.
-
We email you a prepaid shipping label, you pack the instruments, and they travel to our Gaithersburg laboratory. Plan on about five business days in the lab plus ground transit each way, which from the 76301 to 76311 area typically runs two to three days in each direction. Everything comes back with NIST-traceable certificates and, where applicable, as-found and as-left data.
-
Yes, as a scheduled trip. Each of our mobile labs carries more than 100 instrument standards, but because Wichita Falls is roughly 1,400 miles from Gaithersburg we plan North Texas visits as multi-day deployments rather than same-day service calls. Onsite work makes the most sense when you have a large asset count, instruments that must be calibrated in place, or equipment that cannot leave the building. Installation access at Sheppard remains the sponsoring organization's responsibility.
-
Tra-Cal is an ANAB-accredited laboratory holding ISO/IEC 17025:2017 accreditation. Our measurements are NIST-traceable and our documentation references ANSI Z540-1 and Z540.3. Certificates are written to support AS9100, ISO 13485, ISO 9001 and FDA 21 CFR Part 820 quality systems, which is what most Wichita Falls aerospace and medical-device suppliers are audited against.
-
Our disciplines cover RF and microwave, general electronic, temperature and humidity, physical and dimensional, oven and freezer mapping, optical, and timing and frequency. In practice that covers most of what turns up in aircraft-maintenance training labs, machine shops and quality departments around Wichita Falls: torque tools, pressure gauges and transducers, digital multimeters, oscilloscopes, signal generators, micrometers, calipers and gage blocks, and environmental chambers.
-
No, and we would rather say so plainly. Our courier pickup and delivery service covers the Mid-Atlantic within practical driving distance of Gaithersburg, Maryland. Wichita Falls sits well outside that radius, so the service paths available there are prepaid ship-in and scheduled onsite mobile-lab visits.
-
We repair equipment from more than 100 manufacturers, and we also sell new and refurbished instruments. If a unit arrives out of tolerance we quote the repair before doing the work, so you are not left holding a failure certificate and no path forward. If a piece of gear is genuinely beyond economical repair we will tell you that too.
-
Yes. Every account gets a dedicated account manager plus access to our asset database management service, which holds your instrument list, calibration intervals and certificate history and flags upcoming due dates. That matters for operations split across Wichita Falls, Burkburnett and Iowa Park, or for a quality manager assembling records ahead of an AS9100 or ISO 9001 surveillance audit.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Wichita Falls Zip Codes:
76301 through 76311, plus nearby Wichita, Archer and Clay County ZIP codes including 76354 (Burkburnett), 76367 (Iowa Park), 76360 (Electra), 76365 (Henrietta), and 76351 (Archer City).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and flight-line support teams in Wichita Falls, Burkburnett, Iowa Park, Electra, Henrietta, and Archer City with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration from our Gaithersburg, MD laboratory. Call 301-527-9200 or request a free quote online.