In-Lab & Onsite Calibration Services in Wauwatosa, WI
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Wauwatosa area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Wauwatosa, WI
Wauwatosa's regulated facilities concentrate around Watertown Plank Road and West Wisconsin Avenue. Froedtert Memorial Lutheran Hospital and Children's Hospital of Wisconsin both operate there as Medicare certified providers, next to the Medical College of Wisconsin, a degree granting research institution holding active federal research awards. To the west, GE Medical Systems Information Technologies holds an FDA registered device establishment on Innovation Drive along with federal contracts from the Department of Defense and the Department of Veterans Affairs. Harley-Davidson's product development site on West Capitol Drive is classified by EPA as a testing laboratory. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Wauwatosa sits outside our Mid-Atlantic pickup radius, we serve Milwaukee County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Wauwatosa Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Wauwatosa, WI Operations
Additional Calibration Options
How Tra-Cal Serves Wauwatosa, WI
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Wauwatosa-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Wauwatosa and the surrounding Milwaukee County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Facilities of this kind depend on instrumentation holding its accuracy between calibration intervals. Clinical and research spaces rely on temperature and humidity measurement, including mapping of ovens, incubators, refrigerators and freezers where stored material and test conditions are at stake. Device engineering and vehicle testing groups work with electronic, RF and microwave, optical, and timing and frequency instruments, along with physical and dimensional gauges. Documented traceability on each supports audit readiness for biomedical engineering, metrology, and quality and laboratory teams across Wauwatosa, Milwaukee, West Allis, West Milwaukee, Greenfield, Glendale, and communities throughout Milwaukee County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Wauwatosa Zip Codes:
53226, 53213, 53222, 53225
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across electronic and RF test equipment, temperature and humidity instruments, optical instruments, dimensional gauges, and timing and frequency standards, and communities throughout Milwaukee County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.