Does Tra-Cal have a calibration lab in Springfield, VA?

No. Tra-Cal's ISO/IEC 17025:2017 accredited laboratory is located at 8577 Atlas Drive, Gaithersburg, MD 20877, roughly 35 road miles from Springfield. Because Springfield sits inside our Mid-Atlantic pickup and delivery radius, Fairfax County customers can choose scheduled pickup and delivery, prepaid ship-in, or onsite calibration at their facility. We do not operate a walk-in counter in Fairfax County.

Do you offer pickup and delivery in Springfield?

Yes. Springfield is inside our Mid-Atlantic pickup and delivery radius, so a scheduled courier run is usually the simplest option. We collect your instruments, calibrate them in Gaithersburg with a typical five-business-day turnaround, and return them to your dock. Prepaid ship-in is also available if you prefer to handle transit yourself.

Can you support classified or access-controlled facilities in the Springfield area?

Scheduling and site access are arranged through your facility's security and quality points of contact before any onsite visit. Where escorted or badged access is required, we coordinate in advance so the mobile lab technician arrives with the correct credentials and equipment list. Instruments that cannot leave a controlled space are candidates for onsite calibration.

Can you calibrate RF and microwave test equipment used in Springfield?

Yes. RF and microwave is one of our core disciplines, which matters in a corridor built around geospatial, communications, and sensor work. We handle signal generators, spectrum and network analyzers, power meters and sensors, attenuators, noise sources, and frequency counters, with NIST-traceable results.

Are your calibrations accredited and NIST-traceable?

Yes. Tra-Cal is accredited to ISO/IEC 17025:2017 by ANAB, and our measurements are traceable to NIST. We reference ANSI/NCSL Z540-1 and Z540.3 where a customer's quality system calls for it, and our certificates are written to support AS9100, ISO 9001, ISO 13485, and FDA 21 CFR Part 820 audits.

Which instruments can your mobile lab handle onsite in Springfield?

Each Tra-Cal mobile lab carries more than 100 reference instruments, which lets a technician cover electronic, temperature and humidity, physical and dimensional, timing and frequency, and much RF work without removing assets from your floor. Items needing deeper capability are flagged onsite and routed to Gaithersburg.

Can you calibrate environmental chambers, ovens, and freezers in Springfield?

Yes. Oven, freezer, and chamber mapping is a standing capability and is normally performed onsite, since these units are rarely practical to move. We profile the working volume with a multi-point sensor array and issue a report showing uniformity and stability against your acceptance criteria.

What if an instrument fails calibration or needs repair?

We repair instruments from more than 100 manufacturers in-house, so a failed unit does not have to make a second trip. Your dedicated account manager contacts you with findings and an estimate before any repair work begins, and we can also quote replacement equipment through our sales group.

In-Lab & Onsite Calibration Services in Springfield, VA

With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Springfield area.

Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).

Request a Quote

Serving Springfield, VA

Springfield sits in southeastern Fairfax County, where I-95, I-395, and the Capital Beltway all meet at the Springfield Interchange, with the Franconia-Springfield Parkway feeding the Metro and VRE station. The National Geospatial-Intelligence Agency's campus at the Fort Belvoir North Area houses more than 8,500 employees and the NGA College, and the Transportation Security Administration is headquartered nearby. Around them work the geospatial, security, engineering, and logistics contractors that support those missions. Our ANAB-accredited calibration lab supports federal agencies, defense and geospatial contractors, engineering firms, and logistics operations across Springfield and nearby Franconia, Burke, Alexandria, and Fort Belvoir with NIST-traceable calibrations delivered on time and audit-ready.

Springfield sits roughly 35 road miles from our Gaithersburg lab, inside our Mid-Atlantic radius, so we offer three intake paths: scheduled pickup and delivery, prepaid ship-in with a typical five-day turnaround, and onsite calibration appointments. Every calibration is NIST-traceable and ships with an audit-ready certificate.

Why Quality Teams in Springfield, VA Choose Tra-Cal

5-Day Turnaround
Pickup, Delivery, and Prepaid Ship-In
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee

In-Lab & Onsite Calibration Services for Raleigh, NC

Calibration Services Available to Springfield, VA Operations

RF/Microwave Calibration

Electronic Calibration

Temperature & Humidity Calibration

Physical and Dimensional Calibration

Oven/Freezer Calibration

Optical Calibration

Timing/Frequency Calibration

Additional Calibration Options

View All Calibration Services

How Tra-Cal Serves Springfield, VA

In-Lab Calibration:

Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory in Gaithersburg, Maryland, or use scheduled pickup and delivery serving Springfield and Northern Virginia. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.

Discover Our Lab

Onsite Calibration:

Our metrologists travel to Springfield-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.

Learn More

Frequently Asked Questions

Yes. Our ISO/IEC 17025:2017 accredited laboratory is about 35 road miles away in Gaithersburg, Maryland, and Springfield sits inside our Mid-Atlantic pickup and delivery radius. Fairfax County customers can use scheduled pickup and delivery, prepaid ship-in service with a typical five-business-day turnaround, or onsite calibration appointments at your facility.
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
Tra-Cal supports federal agencies and the geospatial, intelligence, and homeland security contractors that work alongside them, plus defense and engineering firms, telecom and RF integrators, laboratories, logistics and light-manufacturing operations, and quality teams across Springfield, Lorton, Burke, Annandale, and the wider Fairfax County area.
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.

Visit Our Gaithersburg Facility or Find Us Near You

Tra-Cal Lab
8577 Atlas Drive 
Gaithersburg, MD 20877

Get Directions

Servicing Local Springfield Zip Codes:

22150, 22151, and nearby Fairfax County ZIP codes including 22152, 22153, 22079, and 22310.

Digital illustration of a web browser window with settings gear icon and bar chart in the background.

Contact Tra-Cal for Calibration Support Today

Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Springfield, Burke, Annandale, Lorton, Alexandria, and communities throughout Fairfax County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.