In-Lab & Onsite Calibration Services in Salt Lake City, UT
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Salt Lake City area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Salt Lake City, UT
Salt Lake City is Utah’s capital and the seat of Salt Lake County, set between the Wasatch Range to the east, the Oquirrh Mountains to the west and the Great Salt Lake to the northwest. It earned the name “Crossroads of the West” honestly: Interstate 15 and Interstate 80 cross inside the city, the I-215 belt route rings the valley, and Salt Lake City International Airport puts direct air freight minutes from downtown. The technical base is deep and unusually varied. L3Harris Technologies runs its Communication Systems West secure-communications and RF electronics operation on the northwest side of the city, and Northrop Grumman’s Bacchus plant on the valley’s western edge in Magna has been casting solid rocket motors and propellant there for decades. On the east bench, the University of Utah anchors the state’s flagship research complex — University of Utah Health reported a research enterprise of roughly $492 million in FY24 — alongside ARUP Laboratories on Chipeta Way, one of the nation’s largest reference laboratories, and the Huntsman Cancer Institute. Diagnostics and device makers including BioFire Diagnostics and Myriad Genetics round out a life-sciences cluster that the Utah Department of Workforce Services counts among the state’s largest employers. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Salt Lake City sits far outside our Mid-Atlantic pickup radius, we serve Salt Lake County and the wider Wasatch Front through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration appointments at your facility. Our laboratory is physically located in Gaithersburg, Maryland — we do not operate an office in Salt Lake City — and every certificate we issue is NIST-traceable and accredited to ISO/IEC 17025:2017 by ANAB.
Why Quality Teams in Salt Lake City Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Salt Lake City, UT Operations
Additional Calibration Options
How Tra-Cal Serves Salt Lake City, UT
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications. Salt Lake City sits at the junction of Interstate 15 and Interstate 80 with air freight out of Salt Lake City International, so most Wasatch Front shipments reach the Gaithersburg lab on an overnight or two-day service.
Onsite Calibration:
Our metrologists travel to the Wasatch Front for scheduled onsite campaigns, arriving in mobile labs that carry more than 100 standards per van. Onsite work suits Salt Lake Valley operations that cannot release whole racks of RF, electrical, temperature, or dimensional assets at once — defense electronics and propulsion suppliers, university and hospital research groups, and diagnostics manufacturers with chambers and incubators fixed in place. Because Salt Lake City falls outside our Mid-Atlantic pickup-and-delivery radius, these visits are planned in advance and are usually combined with nearby West Valley City, Murray, Sandy and Ogden facilities so the trip covers a full instrument population in one mobilization.
Frequently Asked Questions
-
No. Tra-Cal's ISO/IEC 17025:2017 accredited laboratory is located at 8577 Atlas Drive in Gaithersburg, Maryland. We serve Salt Lake City and the wider Wasatch Front through our prepaid ship-in program, with a typical five-business-day turnaround, and through scheduled onsite mobile-lab visits for larger instrument populations. Every certificate is NIST-traceable no matter which path you use.
-
You request a quote, we send a prepaid shipping label, and you hand your instruments to the carrier. Salt Lake City is the Crossroads of the West, where Interstate 15 and Interstate 80 intersect and Salt Lake City International Airport provides direct air freight, so overnight and two-day transit to the East Coast is routine. Once your equipment reaches Gaithersburg, typical turnaround is about five business days, and instruments return with NIST-traceable certificates and as-found / as-left data.
-
Yes, for qualifying instrument populations. Our mobile labs carry more than 100 standards per van and can run RF and microwave, electronic, temperature, and physical/dimensional work inside your facility. Salt Lake City is well outside our Mid-Atlantic pickup-and-delivery radius, so onsite trips to the Wasatch Front are scheduled as planned campaigns rather than routine local runs. Most Salt Lake customers pair one annual onsite visit with prepaid ship-in for the rest of the year.
-
Yes, and it is one of our core disciplines. Salt Lake City hosts L3Harris Technologies' Communication Systems West operation on the northwest side of the city, along with a broad base of suppliers in secure communications and RF electronics, and Northrop Grumman's Bacchus propellant and solid rocket motor plant sits on the valley's western edge in Magna. Tra-Cal calibrates spectrum and network analyzers, signal generators, power meters, attenuators and related standards, and our certificates reference ANSI/NCSL Z540-1 and Z540.3 and support AS9100 flowdown requirements.
-
Yes. The University of Utah is the state's flagship research institution and University of Utah Health reported a research enterprise of roughly $492 million in FY24, with ARUP Laboratories on Chipeta Way operating as one of the nation's largest reference labs and the Huntsman Cancer Institute anchoring clinical research. Salt Lake also hosts diagnostics and device makers including BioFire Diagnostics and Myriad Genetics. We calibrate incubators, ovens, freezers, environmental chambers, balances, pipettes, temperature and humidity instruments, and our documentation supports ISO 13485 and FDA 21 CFR Part 820 quality systems.
-
Tra-Cal is accredited to ISO/IEC 17025:2017 by ANAB, and our scope of accreditation is published as a PDF on this site. All calibrations are NIST-traceable, and the resulting documentation supports quality systems including AS9100, ISO 13485, ISO 9001 and FDA 21 CFR Part 820.
-
We serve Salt Lake County and the wider Wasatch Front from the Gaithersburg lab: Salt Lake City itself in ZIP codes such as 84101, 84104, 84108, 84111, 84115 and 84116, plus West Valley City, Magna, Murray, Midvale, South Salt Lake, Sandy, West Jordan, Draper and Bountiful, along Interstate 15, Interstate 80 and the I-215 belt route.
-
Call +1-301-527-9200 or email info@tra-cal.com with your instrument list, or use the quote form on this page. We confirm accredited scope coverage for each asset, quote the work, then either send a prepaid shipping label or propose onsite dates. Multi-instrument Salt Lake City customers get a dedicated account manager, and we can host your asset database with automatic due-date reminders.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Salt Lake City Zip Codes
84101, 84104, 84108, 84111, 84115 and 84116, plus nearby Salt Lake County ZIP codes including 84119–84120 (West Valley City), 84044 (Magna), 84107 (Murray) and 84070 (Sandy).
Contact Tra-Cal for Calibration Support in Salt Lake City, UT
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, laboratory and operations teams across Salt Lake City, West Valley City, Magna, Murray, Midvale, South Salt Lake, Sandy, West Jordan, Draper and Bountiful with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration from our Gaithersburg, Maryland laboratory. Call 301-527-9200 or request a free quote online.