In-Lab & Onsite Calibration Services in Salina, KS
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Salina area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Salina, KS
Salina is the seat of Saline County government and the principal city of the Census designated Salina, Kansas micropolitan statistical area, in central Kansas at the crossroads of Interstate 70 and Interstate 135. Its technical base is spread across healthcare, aviation, public water utilities, federal maintenance training and applied technical education rather than concentrated in one sector. Salina Regional Health Center at 400 South Santa Fe Avenue and Salina Surgical Hospital at 401 South Santa Fe Avenue are both Medicare certified acute care hospitals inside the city limits. Salina Regional Airport lies within the municipal boundary and is operated by the Salina Airport Authority at 3237 Arnold Avenue, and the Kansas State University Salina Aerospace and Technology Campus is at 2310 Centennial Road. The Army Regional Training Site-Maintenance at 2750 Scanlan Avenue trains wheeled vehicle mechanics, utilities equipment repairers and allied trades specialists, while Salina Area Technical College at 2562 Centennial Road runs welding, machining, electrical, HVAC and industrial maintenance and automation programs. The municipal Salina Water Treatment Plant at 401 South Fifth Street supports a community water system reported to EPA SDWIS as serving more than 46,000 people. Operations like these depend on documented measurement in pressure, temperature, torque, dimensional, electrical, flow and mass disciplines, where a single out of tolerance instrument surfaces later as a failed inspection, an unusable record or an audit finding. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Salina sits outside our Mid-Atlantic pickup radius, we serve Saline County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Salina Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Salina, KS Operations
Additional Calibration Options
How Tra-Cal Serves Salina, KS
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Salina-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Salina and the surrounding Saline County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
The instrument population in and around Salina follows its verified base: hospital and clinical engineering, aviation and aerospace maintenance and instruction, municipal water treatment and distribution, federal vehicle and equipment maintenance training, and technical education laboratories. Tra-Cal calibrates the equipment those functions rely on, including torque wrenches and torque transducers, pressure and vacuum gauges and transmitters, temperature probes, thermocouples and thermometers, dimensional gages such as calipers, micrometers, height gages and gage blocks, electrical test instruments including multimeters, calibrators and power supplies, flow meters, and balances and weight sets. Each calibration is returned with records traceable to the SI through NIST or another recognized national metrology institute, performed under ISO/IEC 17025:2017 as an ANAB-accredited laboratory, so the certificate holds up when an auditor asks how a reading was established. The service is built for maintenance and reliability groups, aviation and ground support technicians, utility and plant operators, instructors and laboratory managers in technical education, and quality and laboratory teams across Salina, Assaria, Brookville, Gypsum, New Cambria, Solomon, and communities throughout Saline County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Salina Zip Codes:
67401 and 67402, and nearby Saline County ZIP codes including 67416, 67425, 67448, 67470, and 67480.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Salina, Assaria, Brookville, Gypsum, New Cambria, Solomon, and communities throughout Saline County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.