In-Lab & Onsite Calibration Services in Radford, VA
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Radford area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Radford, VA
Radford is one of Virginia’s independent cities, bordered by Montgomery County to the east and Pulaski County to the west, on the New River just below Claytor Lake, reached from Interstate 81 at Exit 109 by way of Route 177 — Tyler Avenue — with US 11 running through as Main Street and Route 114 as Peppers Ferry Boulevard. Measurement-dependent operations here include the Radford Army Ammunition Plant, a government-owned, contractor-operated installation of the Army Joint Munitions Command operated by BAE Systems Ordnance Systems Inc., spanning a 4,080-acre main manufacturing unit within roughly 6,901 acres and more than a thousand buildings, with energetics research and development and contained burn chambers under emissions monitoring; Radford University on East Main Street, whose Artis College laboratories run NMR, single-crystal X-ray diffraction, SEM with EDS, ICP and atomic absorption spectrometers, GC/MS and LC/MS, ion chromatography, FTIR and Raman, DSC and TGA and a tensile tester; Kollmorgen Corporation on West Rock Road, an ISO 9001:2015 certified motion control manufacturer; and the city’s New River water treatment plant, licensed for up to 8 million gallons a day. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Radford sits roughly 275 road miles from our Gaithersburg, Maryland laboratory, New River Valley customers typically use one of three intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, scheduled pickup and delivery, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Radford, VA Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Radford, VA Operations
Additional Calibration Options
How Tra-Cal Serves Radford, VA
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Radford-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal serves Radford and the New River Valley from its Gaithersburg, Maryland laboratory through three intake paths: prepaid ship-in service with a typical five-business-day turnaround, scheduled pickup and delivery, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports defense and energetics manufacturing, motion control and electromechanical producers, university research and teaching laboratories, water treatment operations, healthcare teams, and machining and maintenance shops across Radford, Fairlawn, Dublin, Pulaski, and communities throughout the New River Valley.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Radford Zip Codes:
24141, 24142, and nearby New River Valley ZIP codes including 24084, 24301, 24073, and 24149.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Radford, Fairlawn, Dublin, Pulaski, Prices Fork, and communities throughout the New River Valley with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.