In-Lab & Onsite Calibration Services in Puyallup, WA
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Puyallup area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Puyallup, WA
Puyallup was platted by Ezra Meeker in 1877 and incorporated on August 19, 1890, covering about fourteen square miles of the Puyallup River valley in Pierce County. SR 161, SR 167 and SR 512 are the only state routes inside the city, with the SR 512 Puyallup River Bridge carrying about 89,000 vehicles a day, and BNSF, Union Pacific and the Meeker Southern shortline all run through it. The Washington State University Puyallup Research and Extension Center has operated here since 1894 on a 160-acre campus and hosts the Washington Stormwater Center, which coordinates external technical review for the state TAPE program, where a treatment claim stands or falls on the quality assurance plan and the instruments behind it. The city runs an activated sludge water pollution control plant with biological nutrient removal and UV disinfection on 18th Street NW and a water system with 16,241 service connections, 19.3 million gallons of storage and nearly four hundred miles of main, Pierce College Puyallup teaches nursing and biology laboratories on 39th Avenue SE, and the USGS has instrumented the Puyallup River valley with seismometers, tripwire arrays, infrasound sensors and GPS receivers for lahar detection. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Puyallup sits outside our Mid-Atlantic pickup radius, we serve Pierce County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Puyallup Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Puyallup, WA Operations
Additional Calibration Options
How Tra-Cal Serves Puyallup, WA
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Puyallup-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Puyallup and the surrounding Pierce County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports agricultural and environmental research stations, stormwater technology evaluation programs, municipal water and wastewater treatment operations with permit reporting obligations, community college teaching laboratories, events and exposition facilities, and quality and engineering teams across Puyallup, Sumner, Edgewood, Orting, and the wider Pierce County area.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Puyallup Zip Codes:
98371, 98372, and nearby Pierce County ZIP codes including 98373 and 98374.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Puyallup, Sumner, Edgewood, Milton, Fife, Orting, and the wider Pierce County area with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.