In-Lab & Onsite Calibration Services in Plymouth, MN
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Plymouth area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Plymouth, MN
Plymouth covers about 32.7 square miles of land near the geographic center of Hennepin County, Minnesota, roughly 10 miles west-northwest of Minneapolis City Hall, with Interstate 494, U.S. Highway 169, and State Highway 55 crossing the city. Its technical base is concentrated in medical device development and manufacturing, contract chemical processing and metal finishing, and defense production, clustered along the Industrial Park Boulevard, Xenium Lane, Cheshire Lane, Annapolis Lane, and Nathan Lane corridors. FDA device establishment registrations list active operations at 5050 Nathan Lane North for Abbott Medical and St. Jude Medical, Cardiology Division, Inc., at 161 Cheshire Lane for Covidien LLC, at 13700 1st Avenue North for Nonin Medical, Inc., and at 5010 Cheshire Parkway North for SterilMed, Inc. Further registered device operations include Urologix, LLC at 13355 10th Avenue North, ProMed Pharma at 15600 Medina Road, HistoSonics, Inc. at 16305 36th Avenue North, and Philips Image Guided Therapy Corporation at 5905 Nathan Lane North. Federal contracting records place Northrop Grumman Systems Corporation and Alliant Techsystems Operations LLC at 4700 Nathan Lane North on Department of Defense programs. EPA toxics release filings for reporting year 2024 confirm active process operations at Seacole-CRC, LLC, 13505 Industrial Park Boulevard, and Aacron, Inc., 2705 Cheshire Lane North, and EPA drinking water records list the city community water system, PWSID MN1270044, as active and serving about 76,500 people. Operations of this type depend on documented measurement in dimensional, pressure and vacuum, temperature and humidity, torque and force, mass, flow, electrical, and optical disciplines, along with the environmental chambers, balances, and test fixtures that support validated production and cleanroom work. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Plymouth sits outside our Mid-Atlantic pickup radius, we serve Hennepin County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Plymouth Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Plymouth, MN Operations
Additional Calibration Options
How Tra-Cal Serves Plymouth, MN
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Plymouth-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Plymouth and the surrounding Hennepin County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
The instrument population in Plymouth follows its sector mix: medical device design and manufacturing, contract chemical processing and metal finishing, defense production, and municipal water treatment. Tra-Cal calibrates dimensional gauges such as calipers, micrometers, height gauges, and gauge blocks, along with torque tools, force and material test frames, pressure and vacuum gauges, transducers, thermometers, thermocouples, data loggers, environmental chambers, balances and mass sets, flow meters, electrical test instruments, and optical and particle measurement equipment. Calibrations are carried out under an ISO/IEC 17025:2017, ANAB-accredited quality system, and certificates report measured values, measurement uncertainty, and traceability to national standards so the records hold up under FDA, ISO 13485, and AS9100 review. The service is intended for regulated manufacturers, contract development and manufacturing organizations, defense suppliers, metrology and calibration coordinators, maintenance and facilities engineers, and quality and laboratory teams across Plymouth, Maple Grove, Minnetonka, Wayzata, New Hope, Golden Valley, and communities throughout Hennepin County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Plymouth Zip Codes:
55441, 55442, 55446, 55447, and nearby Hennepin County ZIP codes including 55369, 55391, 55427, and 55428.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Plymouth, Maple Grove, Minnetonka, Wayzata, New Hope, Golden Valley, and communities throughout Hennepin County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.