In-Lab & Onsite Calibration Services in Longmont, CO
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Longmont area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Longmont, CO
Longmont sits on St. Vrain Creek in northeastern Boulder County, reaching east into western Weld County, with US-287 running through town as Main Street, CO-119 (the Diagonal Highway) angling southwest to Boulder, CO-66 crossing the north side, and I-25 about five miles east. For a city of roughly 99,000 it carries an unusually deep engineering base: Redwire builds and tests deployable space structures and RF payloads at its Longmont plant, Maxar Technologies runs satellite and Earth-observation programs here, Seagate Technology's storage-technology campus is the largest private employer at about 1,400 people, EnerSys develops stored-energy systems, and the FAA operates the Denver Air Route Traffic Control Center in the city. Precision optics and photonics manufacturers such as Perkins Precision Developments and Photonics Solutions Group fill in around them. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Longmont sits well outside our Mid-Atlantic pickup radius, we serve the St. Vrain Valley from our Gaithersburg, MD laboratory through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Longmont Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Longmont, CO Operations
Additional Calibration Options
How Tra-Cal Serves Longmont, CO
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Longmont-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Longmont sits well outside our Mid-Atlantic pickup and delivery radius, so we support the St. Vrain Valley through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Longmont’s industrial base runs to space and satellite hardware, RF and antenna test, precision optics and photonics, data-storage engineering, stored-energy and power electronics, aviation and air-traffic operations, and food, beverage, and life-sciences production. Tra-Cal calibrates the test, measurement, and laboratory equipment behind that work across Longmont, Niwot, Lyons, Mead, Frederick, Firestone, Dacono, and Erie.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported, including chambers, ovens, and rack-mounted RF equipment. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Longmont Zip Codes:
80501, 80503, and 80504, plus nearby St. Vrain Valley ZIP codes including 80516 (Erie), 80530 (Frederick), 80540 (Lyons), and 80542 (Mead).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Longmont, Niwot, Lyons, Mead, Frederick, Firestone, Dacono, and Erie, and throughout northeastern Boulder County and western Weld County, with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.