In-Lab & Onsite Calibration Services in Lincoln, NE
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Lincoln area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Lincoln, NE
Lincoln is the seat of Lancaster County government, with county offices at 555 South 10th Street, and the center of Nebraska state administration, with the Nebraska State Capitol at 1445 K Street. Its technical base spans a land grant research university, state regulatory laboratories, an aviation maintenance corridor, regulated production, and municipal utilities. The University of Nebraska-Lincoln operates Nebraska Innovation Campus at 2021 Transformation Drive, which houses the Food Innovation Center and the Greenhouse Innovation Center, and the Nebraska Veterinary Diagnostic Center at 4040 East Campus Loop North, accredited by the American Association of Veterinary Laboratory Diagnosticians, the United States Department of Agriculture, and the National Animal Health Laboratory Network. The Nebraska Department of Health and Human Services runs its Public Health Environmental Laboratory at 3701 South 14th Street, an EPA certified laboratory that undergoes on site audits every three years. Northwest of downtown, Lincoln Airport at 2400 West Adams Street, the Nebraska Air National Guard and its 155th Air Refueling Wing at 2411 West Butler Avenue, and Duncan Aviation at 3701 Aviation Road concentrate flight operations and aircraft maintenance in a single corridor. Regulated production and life science work includes Zoetis at 601 West Cornhusker Highway, Teledyne Isco at 4700 Superior Street, Molex at 1400 West Bond Circle, and Kawasaki Motors Manufacturing Corp USA at 6600 NW 27th Street, while clinical measurement runs through Medicare certified hospitals including Bryan Medical Center at 1600 South 48th Street and CHI Health St. Elizabeth at 555 South 70th Street. The city also operates its own utilities, with the Wastewater Division at 2400 Theresa Street and a community water system recorded in EPA drinking water data as serving roughly 296,000 people, and the disciplines that recur across all of this work are temperature and humidity, pressure and vacuum, mass and balance, dimensional, torque, flow, and electrical measurement. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Lincoln sits outside our Mid-Atlantic pickup radius, we serve Lancaster County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Lincoln Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Lincoln, NE Operations
Additional Calibration Options
How Tra-Cal Serves Lincoln, NE
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Lincoln-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Lincoln and the surrounding Lancaster County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Calibration demand in Lincoln comes from aviation maintenance and air refueling support, animal health and pharmaceutical production, environmental and veterinary diagnostic laboratories, municipal water and wastewater treatment, acute care hospitals, and discrete manufacturing. Tra-Cal calibrates the instruments these environments rely on, including temperature and humidity probes and chambers, pressure gauges and transducers, torque wrenches and torque transducers, balances and weight sets, calipers, micrometers and gauge blocks, flow meters, and electrical test and measurement instruments. Work is handled either through instrument submission to the ANAB-accredited, ISO/IEC 17025:2017 laboratory, with a typical five business day turnaround, or through onsite calibration at the customer facility when an instrument cannot leave a production floor or a validated environment. It is built for maintenance and reliability engineers, metrology and calibration coordinators, regulatory and compliance managers, and quality and laboratory teams across Lincoln, Waverly, Hickman, Bennet, Firth, Denton, and communities throughout Lancaster County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Lincoln Zip Codes:
68502, 68503, 68504, 68505, 68506, 68507, 68508, 68510, 68512, 68516, 68521, 68522, 68524, 68526, and 68528, and nearby Lancaster County ZIP codes including 68462, 68372, 68317, 68358, and 68430.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Lincoln, Waverly, Hickman, Bennet, Firth, Denton, and communities throughout Lancaster County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.