In-Lab & Onsite Calibration Services in Glendale, AZ
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Glendale area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Glendale, AZ
Glendale was incorporated as a town in 1910 and now covers about 67 square miles of Maricopa County, reached by the Loop 101 Agua Fria Freeway and US 60 Grand Avenue, with the city operating Glendale Municipal Airport. Luke Air Force Base sits inside the city limits, and its 56th Component Maintenance Squadron runs a Precision Measurement Equipment Laboratory responsible for the accuracy of roughly 6,300 pieces of test equipment supporting 107 on-base and off-base agencies. Banner Thunderbird Medical Center is an 890,000 square foot Level I adult trauma center with on-site laboratory and imaging. Glendale Water Services treats and distributes about 13 billion gallons of potable water and 6 billion gallons of wastewater a year across more than 1,700 miles of pipe for 234,766 people, Midwestern University runs its AZ Core Research Facility on 59th Avenue, and aircraft maintenance work runs out of the Glen Harbor corridor at the municipal airport. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Glendale sits outside our Mid-Atlantic pickup radius, we serve the Phoenix West Valley through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Glendale Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Glendale, AZ Operations
Additional Calibration Options
How Tra-Cal Serves Glendale, AZ
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Glendale-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Glendale and the surrounding West Valley through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports military precision measurement and flight line maintenance operations, Level I trauma center laboratory and imaging departments, municipal water and wastewater treatment with permit reporting obligations, health sciences research facilities, aircraft maintenance and airworthiness programs, and quality and engineering teams across Glendale, Peoria, El Mirage, Surprise, and the wider Phoenix West Valley.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Glendale Zip Codes:
85301, 85302, 85303, 85305, and nearby Glendale ZIP codes including 85304, 85306, 85307, and 85308.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Glendale, Peoria, El Mirage, Surprise, Youngtown, Sun City, and the wider Phoenix West Valley with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.