In-Lab & Onsite Calibration Services in Fairborn, OH
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Fairborn area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Fairborn, OH
Fairborn sits in Greene County directly outside the gates of Wright-Patterson Air Force Base, the installation northeast of Dayton that houses the Air Force Research Laboratory, the Air Force Life Cycle Management Center, the National Air and Space Intelligence Center, and the Air Force Institute of Technology. The city is reached by Interstate 675, State Route 4, State Route 444, and State Route 235, and it is the only city in the world named Fairborn, a portmanteau created in 1950 when the villages of Fairfield and Osborn merged after Osborn was physically relocated for the building of Huffman Dam. Wright State University and its roughly 12,000 students are here, along with the National Center for Medical Readiness training site known as Calamityville, while Fairborn’s own top employers include the defense engineering firms Peerless Technologies and The Design Knowledge Company and industrial manufacturer Ali Industries. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Tra-Cal’s laboratory is in Gaithersburg, Maryland, roughly 470 miles east of Fairborn by way of I-70, which puts the Dayton area well outside our Mid-Atlantic pickup-and-delivery radius. Greene County customers therefore work with us through one of two intake paths: prepaid ship-in calibration, with inbound and return shipping covered and a typical five-business-day turnaround, or onsite calibration appointments in which a mobile lab is scheduled to your facility. Every calibration is performed against documented procedures, traced through NIST, and issued with an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Greene County Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Fairborn, OH Operations
Additional Calibration Options
How Tra-Cal Serves Fairborn, OH
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Fairborn-area facilities on scheduled Ohio routes using I-675, State Route 4, and State Route 444, with more than 100 reference standards per mobile lab. Onsite work suits fixed assets, large inventories, and instruments that should not leave the floor. Calibration is performed in a controlled environment at your site by appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Fairborn adjoins Wright-Patterson Air Force Base in Greene County, roughly 470 miles west of our Gaithersburg lab and well outside the Mid-Atlantic pickup-and-delivery radius. We serve the Dayton area two ways: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply either way.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation through ANAB. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument, plus transit time from the Miami Valley. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports the defense research and acquisition community next door at Wright-Patterson Air Force Base, home to the Air Force Research Laboratory, the Air Force Life Cycle Management Center, the National Air and Space Intelligence Center, and the Air Force Institute of Technology; the engineering-services and aerospace contractors based in Fairborn itself, including Peerless Technologies and The Design Knowledge Company; industrial manufacturing at Ali Industries; teaching and research instrumentation at Wright State University; and the emergency-response and medical readiness training run by the National Center for Medical Readiness at its Calamityville site.
-
Yes. Our mobile labs carry more than 100 reference instruments per van and travel to Fairborn-area facilities on scheduled Ohio routes using I-675, State Route 4, and State Route 444. Onsite service is the practical choice for fixed assets, large instrument inventories, and equipment that should not be moved off the floor.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support. A dedicated account manager coordinates recall schedules so Fairborn-area quality teams are not tracking due dates by spreadsheet.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Fairborn Zip Codes:
45324, plus nearby Greene and Montgomery county codes including 45433 (Wright-Patterson AFB), 45431 (Beavercreek), 45385 (Xenia), 45387 (Yellow Springs), and 45424 (Huber Heights).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Fairborn, Beavercreek, Xenia, Huber Heights, Yellow Springs, and communities throughout Greene County and the Dayton area with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.