In-Lab & Onsite Calibration Services in Columbus, IN
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Columbus area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Columbus, IN
Columbus is the county seat of Bartholomew County, Indiana. Interstate 65 runs north and south through the western city limits, and US 31, State Road 46 and State Road 11 all run inside the corporate boundary. Cummins Inc. is headquartered at 500 Jackson Street and operates the Columbus Engine Plant at 500 Central Avenue along with a technical center at 1900 McKinley Avenue, reported to EPA as TRI facility 47201CMMNS1900M. Toyota Material Handling, Inc. manufactures at 5559 Inwood Drive, TRI facility 47202TYTND5555I. Enkei America, Inc. runs a light metal casting operation at 2900 West Inwood Drive, TRI facility 47201NKMRC2900W. Faurecia Emissions Control Technologies holds an active air program facility record at 950 West County Road 450 South. The City of Columbus owns Columbus Municipal Airport at 4770 Ray Boll Boulevard, FAA identifier BAK, a towered public use field with an instrument landing system serving Runway 23. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Columbus sits outside our Mid-Atlantic pickup radius, we serve Bartholomew County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Columbus Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Columbus, IN Operations
Additional Calibration Options
How Tra-Cal Serves Columbus, IN
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Columbus-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Columbus and the surrounding Bartholomew County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports diesel engine and power systems manufacturing, engineering and testing laboratories, material handling equipment manufacturing, aluminum foundry and die casting, iron and steel forging, municipal water and wastewater utilities, and quality and laboratory teams across Columbus, Hope, Clifford, Elizabethtown, Jonesville, and communities throughout Bartholomew County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Columbus Zip Codes:
47201, 47203, and nearby Bartholomew County ZIP codes including 47246, 47226, and 47232.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Columbus, Hope, Clifford, Elizabethtown, Jonesville, Hartsville, and communities throughout Bartholomew County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.