In-Lab & Onsite Calibration Services in Christiansburg, VA
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Christiansburg area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Christiansburg, VA
Christiansburg is the Montgomery County seat, sitting at the crossroads of Interstate 81, US 11 and US 460 in Virginia’s New River Valley, with Route 8 and Route 114 — Peppers Ferry Road — fanning out from town, Norfolk Southern freight rail running through it, and the fifteen-mile Huckleberry Trail linking it to Blacksburg. Measurement-dependent operations here include SGS Polymer Solutions on Technology Drive, an independent analytical and materials testing laboratory accredited to ISO/IEC 17025:2017 through ANAB and FDA-registered under 21 CFR Parts 11, 210, 211, 610 and 820; Carilion New River Valley Medical Center on Lamb Circle, the acute-care hospital serving Montgomery, Pulaski, Floyd, Wythe and Giles counties and the City of Radford; Corning Incorporated’s ceramics manufacturing plant on North Franklin Street, which carries active EPA air, water, RCRA and greenhouse-gas program obligations; and the town’s wastewater treatment facility on Crab Creek Road, rated at 6 million gallons per day and the first Virginia locality to earn VOSH SHARP worksite status. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Christiansburg sits roughly 265 road miles from our Gaithersburg, Maryland laboratory, New River Valley customers typically use one of three intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, scheduled pickup and delivery, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Christiansburg, VA Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Christiansburg, VA Operations
Additional Calibration Options
How Tra-Cal Serves Christiansburg, VA
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Christiansburg-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal serves Christiansburg and the New River Valley from its Gaithersburg, Maryland laboratory through three intake paths: prepaid ship-in service with a typical five-business-day turnaround, scheduled pickup and delivery, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports independent testing and analytical laboratories, ceramics and glass manufacturers, healthcare and clinical laboratory teams, heavy vehicle and transportation assembly plants, water and wastewater utilities, and precision machining and additive manufacturing operations across Christiansburg, Shawsville, Elliston, Riner, and communities throughout Montgomery County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Christiansburg Zip Codes:
24073 and nearby New River Valley ZIP codes including 24162, 24087, 24149, and 24084.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Christiansburg, Shawsville, Elliston, Riner, Dublin, and communities throughout Montgomery County and the New River Valley with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.