In-Lab & Onsite Calibration Services in Broomfield, CO
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Broomfield area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Broomfield, CO
Broomfield is one of only two consolidated city and county governments in Colorado. Voters approved the change in 1998 and it took effect in 2001, detaching the territory from Adams, Boulder, Jefferson and Weld counties so that a single authority now issues the permits, operates the utilities and holds the records. US 36 and the 8.6-mile Northwest Parkway link it to Denver and to E-470 and Interstate 25, with US 287 Wadsworth Boulevard, SH 7, SH 121 and SH 128 inside the limits and 267 miles of city centerline under 98 traffic signals. MKS Instruments runs a 107,000 square foot manufacturing and research operation on Reed Way building vacuum and pressure measurement and control products, BAE Systems Space and Mission Systems is headquartered on Airport Way building satellites and spacecraft instruments, Point Designs manufactures FDA-registered prosthetic fingers and thumbs on West 6th Avenue, and the city and county operates a 24 million gallon a day water treatment facility and a 12 million gallon a day water recovery facility across 483 miles of water pipe and 326 miles of sewer pipe. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Broomfield sits outside our Mid-Atlantic pickup radius, we serve the north Denver metro through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Broomfield Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Broomfield, CO Operations
Additional Calibration Options
How Tra-Cal Serves Broomfield, CO
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Broomfield-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Broomfield and the surrounding north Denver metro area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports vacuum and pressure instrument manufacturing, satellite and spacecraft hardware production, FDA-registered medical device manufacturers, municipal water treatment and water recovery operations, window covering and light manufacturing, and quality and engineering teams across Broomfield, Westminster, Louisville, Lafayette, Erie, and the surrounding north Denver metro area.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Broomfield Zip Codes:
80020, 80021, 80023, and nearby ZIP codes including 80027, 80031, and 80516.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Broomfield, Westminster, Superior, Louisville, Lafayette, Erie, Thornton, and the wider north Denver metro area with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.