In-Lab & Onsite Calibration Services in Bridgeport, WV
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Bridgeport and Harrison County area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Bridgeport, WV
Bridgeport sits in eastern Harrison County, West Virginia, where Interstate 79 meets US Route 50 at exit 119, with additional access at exits 121 and 124 and along WV Route 279 — known locally as Jerry Dove Drive. Its defining industrial asset is the North Central West Virginia Airport, operated by the Benedum Airport Authority a mile northeast of town, which is home to the Mid-Atlantic Aerospace Complex and its cluster of aerospace employers including Aurora Flight Sciences, Pratt & Whitney, Mitsubishi Heavy Industries (formerly Bombardier), and Lockheed Martin. Fairmont State University runs its flight school from a facility on the east side of the 7,800-foot runway, and Pierpont Community and Technical College trains aviation maintenance technicians to FAA Part 147 standards. Six miles west in Clarksburg, the FBI Criminal Justice Information Services Division occupies a half-million-square-foot facility on a 986-acre campus, and a former glass plant in Bridgeport is being converted into a lithium battery production facility. Tra-Cal provides ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment to organizations working in this environment.
Our laboratory is physically located at 8577 Atlas Drive in Gaithersburg, Maryland; we do not operate an office in Bridgeport. Because north-central West Virginia sits outside our Mid-Atlantic pickup and delivery radius, we serve Harrison County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration appointments at your facility using our mobile laboratories, which carry more than 100 instruments per van. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Harrison County Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Bridgeport and Mid-Atlantic Aerospace Complex Operations
Additional Calibration Options
How Tra-Cal Serves Bridgeport, WV
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Bridgeport and North Central West Virginia Airport facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal's laboratory is in Gaithersburg, Maryland, and north-central West Virginia sits outside our Mid-Atlantic pickup and delivery radius, so we serve Bridgeport two ways: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration appointments at your facility using our mobile laboratories. The same ISO/IEC 17025:2017 accreditation, NIST traceability, and audit-ready certificate format apply either way.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Bridgeport's industrial base is led by aerospace. The Mid-Atlantic Aerospace Complex at North Central West Virginia Airport hosts aerospace manufacturing, engine work, and unmanned systems, and Tra-Cal supports those operations with RF/microwave, electronic, physical and dimensional, torque and pressure, and temperature and humidity calibration. We also serve federal and government contractors in the Clarksburg area, energy and natural gas operators across Harrison County, healthcare and clinical labs, battery and materials manufacturing, and aviation maintenance training programs.
-
Yes. Our mobile laboratories travel to Bridgeport and the North Central West Virginia Airport area for fixed assets, large inventories, and instruments that should not be moved off a hangar floor or production line. Each van carries more than 100 reference instruments, and visits are scheduled with your team so calibration is performed in a controlled environment at your site with the same accreditation, NIST traceability, and documentation as in-lab service. Because Bridgeport is a long haul from Gaithersburg, most customers batch a full asset list into a single onsite visit.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Bridgeport Zip Codes:
26330, plus nearby Harrison County and north-central West Virginia ZIP codes including 26301 (Clarksburg), 26323 (Anmoore), 26431 (Shinnston), and 26554 (Fairmont).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Bridgeport, Clarksburg, Anmoore, Shinnston, and Fairmont, and throughout Harrison County and the I-79 corridor, with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.