In-Lab & Onsite Calibration Services in Bridgeport, WA
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Bridgeport area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Bridgeport, WA
Bridgeport sits on the south bank of the Columbia River in northern Douglas County, at the point where SR 17 meets SR 173 roughly a mile and a half downstream from Chief Joseph Dam. That dam is the largest hydropower producer operated by the U.S. Army Corps of Engineers and the second largest in the United States — 27 generating units, about 2,620 megawatts of capacity, a Seattle District project office on site, and output marketed by the Bonneville Power Administration. The surrounding mid-Columbia corridor adds Douglas County PUD's Wells Dam downstream and the Bureau of Reclamation's Grand Coulee Dam upstream, while the orchards, packing houses, and controlled-atmosphere cold storage around Bridgeport and Brewster carry a measurement load of their own. Work of this kind runs on documented electrical, pressure, temperature, torque, and dimensional readings, and Tra-Cal supports it with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Our laboratory is physically located in Gaithersburg, Maryland, which places Bridgeport well outside the Mid-Atlantic radius we cover with pickup and delivery. Douglas County customers are served two other ways instead: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration appointments at your facility for instrumentation that cannot leave the powerhouse, the substation, or the cold-storage room. Either path is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in the Bridgeport Area Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Bridgeport, WA Operations
Additional Calibration Options
How Tra-Cal Serves Bridgeport, WA
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Bridgeport-area facilities across Douglas and Okanogan counties for fixed assets, large inventories, and instruments that should not be moved — powerhouse and substation test sets, panel instrumentation, and cold-storage chambers are typical examples. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Bridgeport sits well outside our Mid-Atlantic pickup and delivery radius, so we serve Douglas County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and scheduled onsite calibration at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports hydroelectric generation and transmission operations along the mid-Columbia River, federal and public utility district maintenance and instrumentation shops, electrical test and relay crews, tree-fruit packing and controlled-atmosphere cold storage facilities, irrigation and water-management operations, and heavy construction contractors across Bridgeport, Brewster, Mansfield, Waterville, and the surrounding Douglas and Okanogan county communities.
-
Yes. Onsite calibration is available for fixed assets, large instrument inventories, and equipment that should not be transported, such as powerhouse and substation test sets, panel instrumentation, and cold-storage chambers. A scheduled appointment is arranged with your team and the calibration is performed at your facility with the same accreditation, NIST traceability, and documentation as in-lab service.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Bridgeport Zip Codes:
98813, plus nearby Douglas and Okanogan county ZIP codes including 98812 (Brewster), 98830 (Mansfield), 98858 (Waterville), and 99116 (Coulee Dam).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports maintenance, engineering, and quality teams across Bridgeport, Brewster, Mansfield, Waterville, and the wider Douglas and Okanogan county area with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.