In-Lab & Onsite Calibration Services in Bedford, TX
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Bedford area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Bedford, TX
Bedford sits in northeastern Tarrant County in the Dallas–Fort Worth “Mid-Cities,” linked by State Highway 121 and State Highway 183 (Airport Freeway) alongside Dallas/Fort Worth International Airport. It sits in a dense industrial corridor that runs through neighboring Hurst, Euless, Grapevine, Colleyville, and North Richland Hills and feeds the broader Metroplex aerospace and defense base — Lockheed Martin’s F-35 line and Bell’s rotorcraft plants in nearby Fort Worth, plus precision machining, electronics, and medical-device manufacturers across Tarrant County. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Bedford sits well outside our Mid-Atlantic pickup radius, we serve the Dallas–Fort Worth Metroplex through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams across the Dallas–Fort Worth Metroplex Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Bedford, TX Operations
Additional Calibration Options
How Tra-Cal Serves Bedford, TX
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Bedford-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Bedford and the wider Dallas–Fort Worth Metroplex through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Tra-Cal supports aerospace and defense contractors, precision electronics and RF systems, medical device and life-sciences manufacturers, research and engineering teams, energy and utilities, and quality and laboratory groups across Bedford, Hurst, Euless, Grapevine, Colleyville, North Richland Hills, Arlington, Fort Worth, and communities throughout Tarrant County and the Dallas–Fort Worth Mid-Cities.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Bedford Zip Codes:
76021 and 76095, plus nearby Mid-Cities ZIP codes including 76053 (Hurst), 76039 and 76040 (Euless), 76051 (Grapevine), 76034 (Colleyville), and 76180 (North Richland Hills).
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Bedford, Hurst, Euless, Grapevine, Colleyville, North Richland Hills, Arlington, and Fort Worth and communities throughout Tarrant County and the Dallas–Fort Worth Metroplex with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.