In-Lab & Onsite Calibration Services in Auburn Hills, MI
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Auburn Hills area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Auburn Hills, MI
Auburn Hills sits in east central Oakland County, Michigan, roughly 26 miles north of downtown Detroit, and shares its western boundary with Pontiac, where the Oakland County government complex is located. Its industrial base leans toward engineering, development, and regulated manufacturing rather than high volume assembly. BorgWarner Inc. reports its corporate headquarters at 3850 Hamlin Road in filings with the Securities and Exchange Commission. American Rheinmetall Vehicles, LLC operates from 2200 North Opdyke Road and holds a Department of Defense development contract for the Optionally Manned Fighting Vehicle program that runs into 2027. Jabil Inc. maintains an FDA registered contract medical device manufacturing establishment at 3800 Giddings Road under registration number 3005646850. ABB Inc. runs a robotics operation at 1250 Brown Road, and FEV North America, Inc. operates an engineering facility at 4554 Glenmeade Lane, both carrying active federal environmental program registrations. Operations of this kind depend on dimensional, torque, pressure, electrical, temperature, and mass measurements that stay traceable to national standards and documented closely enough to hold up under customer and regulatory audit. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Auburn Hills sits outside our Mid-Atlantic pickup radius, we serve Oakland County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Auburn Hills Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Auburn Hills, MI Operations
Additional Calibration Options
How Tra-Cal Serves Auburn Hills, MI
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Auburn Hills-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Auburn Hills and the surrounding Oakland County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Work in the area centers on automotive and mobility engineering, defense vehicle development, robotics and factory automation, and regulated medical device manufacturing, each carrying its own documentation burden. Tra-Cal calibrates the instruments these groups depend on, including torque wrenches and transducers, pressure gauges and calibrators, multimeters and electrical test instruments, micrometers, calipers, height gauges and dial indicators, temperature probes and data loggers, force and load cells, and balances and mass sets. Every calibration is issued with a certificate recording measurement results, measurement uncertainty, and traceability to national standards, which is the record an auditor asks to see. The service is built for engineering managers, maintenance and metrology supervisors, and quality and laboratory teams across Auburn Hills, Pontiac, Rochester Hills, Troy, Lake Orion, Bloomfield Hills, and communities throughout Oakland County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Auburn Hills Zip Codes:
48326, and nearby Oakland County ZIP codes including 48307, 48309, 48341, 48342, and 48362.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Auburn Hills, Pontiac, Rochester Hills, Troy, Lake Orion, Bloomfield Hills, and communities throughout Oakland County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.