In-Lab & Onsite Calibration Services in Altus, OK
With over 35 years of experience, our technicians have provided precise calibration, instrument repair, and metrology database management to a diverse range of industries across the Altus area.
Located in Gaithersburg, MD, our calibration laboratory—accredited to ISO/IEC 17025:2017, ANSI Z540-1, and Z540.3 standards—adheres to strict quality protocols. We perform all calibrations and repairs in line with manufacturer specifications to ensure your measurement tools remain reliable, repeatable, and audit-ready. Each calibration is accompanied by a certificate that confirms compliance with the rigorous standards set by the National Institute of Standards and Technology (NIST).
Serving Altus, OK
Altus is the county seat and the largest city of Jackson County in southwest Oklahoma, with 18,729 residents recorded in the 2020 Census. Its technical base runs to military aviation training, defense training support work, acute care medicine, food manufacturing, technical education, and municipal utility operations rather than heavy industry. Altus Air Force Base lies inside the city limits and hosts the 97th Air Mobility Wing, which conducts formal aircrew training for the C-17 Globemaster III, KC-135 Stratotanker, and KC-46 Pegasus. Quartz Mountain Regional Airport, owned by the City of Altus at 509 S Main St, is also inside the city limits and operates a 5,501 foot concrete runway with medium intensity edge lighting, precision approach path indicators, and an AWOS-3PT weather station. Aviation Training Consulting, LLC is headquartered at 123 W Commerce St and holds active Department of Defense aircrew training and training system support awards. Jackson County Memorial Hospital at 1200 East Pecan St is the county acute care hospital with emergency services, and the Bar-S Foods plant at 500 S Bar-S Blvd operates under a Clean Air Act permit covering its smokehouse boiler operation. Western Oklahoma State College at 2801 N Main St and Southwest Technology Center at 711 W Tamarack Rd train nursing, science, biomedical science, and aviation maintenance students on the same classes of instruments, and the City of Altus operates a community surface water system serving about 18,700 people from a treatment plant on N Spurgeon St. Work across these sites depends on torque, pressure, temperature, electrical, dimensional, flow, and mass measurements that have to stay traceable to national standards and documented closely enough to hold up under audit. Tra-Cal supports these operations with ANAB-accredited ISO/IEC 17025:2017 calibration of test, measurement, and laboratory equipment.
Because Altus sits outside our Mid-Atlantic pickup radius, we serve Jackson County through two intake paths: prepaid ship-in calibration with a typical five-business-day turnaround, and onsite calibration appointments at your facility. Each calibration is performed against documented procedures, traced through NIST, and accompanied by an audit-ready certificate that supports AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality systems.
Why Quality Teams in Altus Choose Tra-Cal
5-Day Turnaround
Prepaid Ship-In and Return Shipping
Onsite Calibration at Your Facility
Comprehensive Asset Database Management
Dedicated Account Managers
Veteran-Owned & Operated
Unwavering Quality Guarantee
Calibration Services Available to Altus, OK Operations
Additional Calibration Options
How Tra-Cal Serves Altus, OK
In-Lab Calibration:
Send your equipment to our ANAB-accredited ISO/IEC 17025:2017 laboratory with prepaid inbound and return shipping. Calibration is performed in a climate-controlled environment against documented procedures, with traceability through NIST. Standard turnaround is approximately five business days from receipt, and asset records are retained with automated due-date notifications.
Onsite Calibration:
Our metrologists travel to Altus-area facilities for fixed assets, large inventories, and instruments that should not be moved. Calibration is performed in a controlled environment at your site on a scheduled appointment, with the same accreditation, NIST traceability, and documentation as in-lab service.
Frequently Asked Questions
-
Yes. Tra-Cal supports Altus and the surrounding Jackson County area through two intake paths: prepaid ship-in service with a typical five-business-day turnaround, and onsite calibration appointments at your facility. The same ISO/IEC 17025:2017 accreditation, NIST-traceable standards, and certificate format apply regardless of intake method.
-
Yes. Tra-Cal maintains ISO/IEC 17025:2017 accreditation. ANSI/NCSL Z540-1 and Z540.3 conformance is also available. The current scope of accreditation is published on the Tra-Cal Certificate of Accreditation page.
-
Standard turnaround for in-lab calibration is approximately five business days from receipt of the instrument. Expedited turnaround is available on request and depends on instrument type, parameter scope, and current lab volume.
-
Yes. Each calibration certificate documents traceability through NIST, includes as-found and as-left data where applicable, lists the standards used, the calibration procedure reference, environmental conditions, and the technician. Certificates are designed to support AS9100, ISO 13485, ISO 9001, and FDA 21 CFR Part 820 quality system audits.
-
Calibration demand in and around Altus comes from aerospace and defense aviation training, government and military support contracting, healthcare and clinical engineering, food processing, public utilities, and technical education. Tra-Cal calibrates torque wrenches and torque transducers, pressure gauges and pressure transducers, temperature probes, thermocouples and dataloggers, multimeters, oscilloscopes, power supplies, calipers, micrometers, gage blocks, dial indicators, flow meters, balances, and weight sets, and issues an ISO/IEC 17025:2017 calibration certificate traceable to national standards for each item. Instruments can be submitted to the ANAB-accredited laboratory in Gaithersburg, Maryland under a prepaid submission program with a typical five business day turnaround, or calibrated onsite at the customer facility when equipment cannot leave the floor. The service is built for maintenance and facilities managers, calibration and metrology coordinators, clinical engineering and biomedical staff, plant and production supervisors, and quality and laboratory teams across Altus, Blair, Olustee, Martha, Headrick, Elmer, and communities throughout Jackson County.
-
Yes. Onsite calibration is available for fixed assets, large inventories, and instruments that should not be transported. A scheduled appointment is set with your team, and the calibration is performed in a controlled environment at your facility with full documentation.
-
A packaging guide is provided when you request a quote. In general, instruments should be powered down, accessories included where required for calibration, and packed with appropriate cushioning. A prepaid shipping label is available for qualifying customers.
-
Yes. Tra-Cal offers metrology database management with automated due-date notifications, historical certificate retrieval, and asset-level records suitable for audit support.
Visit Our Gaithersburg Facility or Find Us Near You
Tra-Cal
Lab
8577 Atlas Drive
Gaithersburg, MD 20877
Servicing Local Altus Zip Codes:
73521 and 73523, and nearby Jackson County ZIP codes including 73526, 73556, 73560, 73549, and 73539.
Contact Tra-Cal for Calibration Support Today
Tell us your instrument list, required turnaround, and accreditation level. Most quote requests are returned within one business day. Tra-Cal supports quality, engineering, and operations teams across Altus, Blair, Olustee, Martha, Headrick, Elmer, and communities throughout Jackson County with ANAB-accredited ISO/IEC 17025:2017, NIST-traceable calibration. Call 301-527-9200 or request a free quote online.